DOWSIL(DC)GlassSealant


CLICK HERE FOR HOMEPAGE

 Imports
 Exports

Lubricants
    Problem Solutions
    Molykote 111
    Molykote BG 555
    Molykote GN Plus
    Molykote P 37
    Molykote Range
    Molykote TP 42
    Molykote MOS2 Powder
    NO-OX-ID A-SPECIAL

RTV Silicone Sealants
Engg / Auto Industry
    DOWSIL 732
    DOWSIL 733
    DOWSIL 734
    DOWSIL 736

Building Industry
    DOWSIL CCS
    DOWSIL 1000
    DOWSIL 995
    DOWSIL 983
    DOWSIL 795
    DOWSIL 789
    DOWSIL 789P
    DOWSIL 817
    DOWSIL 991 HP
    DOWSIL(DC)GlassSealant

Release Products
    PMX200
    Silicone Spray

Others
    Excellence PU Foam
    Parafill
    Hylomar
    Cem-FIL

Tapes
    Excellence Masking Tape

Coatings
    Molykote Zinc Spray
    Teflon

Miscellaneous
    India Page
    Useful Links
    Disclaimer

Feedback
Awards & Mementos


                    




DOWSIL(DC)GlassSealant
RTV Silicone Sealant
Single Component
Room Temp Curing
General Purpose



Best for sealing Glass, Aluminum and small aquariums

Description ::
Dow Corning Glass Sealant is a high performance, one-part silicone sealant that offers excellent adhesion (usually without a primer), weatherability, elasticity and long life reliability for glazing.

Important Features ::
Ease of use - one part, no mixing required.

Good weatherability - virtually unaffected by sunlight, rain, snow, ozone or temperature extremes.

Long-life reliability - cured sealant stays rubbery from -60 to +200 deg C without tearing, cracking, drying out or becoming brittle.

All temperature gunnability - can be applied in any season.

Can be used with most common building materials.

Available in clear or transluscent colours.

Uses ::
This is primarily designed for conventional and plastic glazing and curtainwall sealing . Ideally suited for sealing glass, aluminum, small aquariums, tanks and window frames.

Limitations ::
Do not use for structural glazing.
Should not be applied to surfaces to be painted.

Packings ::
300 ml cartridges

Colours ::
Clear or transluscent

Typical Properties ::
Flow, sag or sump - nil
Skin over time - 5 minutes
Working time - 10 minutes
Cure time at 25 deg C -1 to 2 days

After curing for 7 days

Durometer Hardness, Shore A - 25
Ultimate Tensile Strength - 1.5 mpa
Temperature Stability - -60 to 200 deg C
Movement capability - +/- 25%

Caution ::
Users are advised to conduct their own tests to check suitability to specific applications.


Click here to download Data Sheet:
Price :: Mail us your equirements.. Quantity, Packing, Destination,etc.



Mail To fourp@4pcorporation.com
 MOLYKOTE® is Smart LubricationT


Head Office
Four-P International Pvt Ltd
No.6,Esplanade, 3rd floor,
Indian Chamber Building,
Chennai-600 108.
India.
Telefax - 91 44 2533 1110/2

Hyderabad Branch
Four-P International Pvt Ltd
No: 193, Ground Floor,
Vasavi Nagar,
Karkhana,
Secunderabad - 500 015.
Phone - 040 27748077
Mobile: 98490 66674 (Mr.Murthy)

Madurai Branch

Mr.Manohar
Mobile: 98414 20683

Bangalore Branch

RJ Sham Sundar
Mobile:9886256969

Page Last Updated: 4/22/2022 3:49:33 AM

     [ Disclaimer ]




| PMX200 | DOWSIL(DC)GlassSealant | DOWSIL CCS | DOWSIL 1000 [ DOWSIL 995 [ DOWSIL 983 | DOWSIL 991 HP | DOWSIL 789 | DOWSIL 789P | DOWSIL 817 | Cem-FIL | Excellence Masking Tape | Disclaimer | Exports | Hylomar | Silicone Spray | HomePage [ Imports | India Page | Molykote 111 | Molykote BG 555 | Molykote GN Plus | Molykote P 37 | Molykote Range [ Molykote TP 42 | Molykote MOS2 Powder | Molykote Zinc Spray | Problem Solutions | DOWSIL 732 | DOWSIL 733 [ DOWSIL 734 | DOWSIL 736 | Useful Links Teflon NO-OX-ID Excellence PU Foam Parafill

Site owned by :
Four P International Pvt Ltd,
Chennai, India.

You are Visitor Number
Since 20 March 2003
  CLICK HERE FOR HOMEPAGE