Silastic 735 Oil-Resistant Silicone Sealant
Creates Formed-in-Place Gaskets for
Gear Boxes, Engines, Pumps,
Flanges and general
Industrial Equipment
Reduces Maintenance And Best for Industrial use
Description ::
SILASTIC 735 is designed specifically for sealing and bonding on general Industrial Equipment in areas
exposed to oils, coolants and lubricants. Oil resistance properties are combined with other
well-known advantages of silicone sealants - resistance to weather, vibration, moisture,
Ozone, and extreme temperatures. The result is longer service life and less maintenance.
Oil circulation systems, machine housings, conveyor guides and guards, oil containment
troughs or barriers, and piping, are the areas where 735 could be expected to last longer than
products without oil resisting properties.
Dow Corning 735 can also be used to create formed-in-place gaskets for Gear Boxes, Engines,
Pumps and Flanges. It is also good choice for gasketing and sealing in off-road equipment and
automotive applications.
Important Features ::
A Dow Corning (owners of SILASTIC & Molykote Brands) product.
Ease of use - one part, no mixing required, Non slumping, Non shrinking.
Does not crack, crumble or dry out with vibration and heat.
Low-swell and excellent resistance with most common oils, coolants and other lubricating materials.
Low Volatility silicone meets automotive silicone requirements for engines equipped with oxygen sensors.
Low Odour/Non-corrosive No offensive odours are emitted during cure, and is non-corrosive on most
common substrates.
Excellent temperature range -62 deg C to + 204 deg C.
Bonds almost all surfaces.
Chemically stable.
Colours ::
Black.
Limitations ::
On contact, uncured sealant may cause irritation, avoid contact with eyes and skin.
Do not use for applications where product will be in constant contact with gasoline, synthetic
fuels or solvents.
Requires moisture in the air to cure. Avoid application in totally confirmed spaces.
Typical Properties ::
One-part silicone rubber.
Non slumping paste
Skin over time - 10 minutes
Tack free time - 20 minutes..
Cure time 1/8 inch - 24 hrs
After curing:
Colour - Black
ASTM D 2240 - Durometer Hardness, Shore A - 40
ASTM D 412 - Ultimate Tensile Strength - 325 psi (mpa)
ASTM D 412 - Elongation % - 300
Adhesion-Lap shear - 250 to 300 lbs
Caution ::
Users are advised to conduct their own tests to check suitability to specific applications.
Mail/Fax your enquiries
Head Office Four-P International Pvt Ltd No.6,Esplanade, 3rd floor, Indian Chamber Building, Chennai-600 108. India.
Telefax - 91 44 2533 1110/2
