Type                            : Non-Metallic fatty chemical

Spray rate                   : 0.5 to 0.7 gram / second

Thermal stability        : -50 to 300 o C

Covering area            : 21 TO 23 Sq. cm @ 9 to 10 inches between the nozzle and the                                       mould.

Spray cone angle       : 30 to 40 deg.

Coating thickness      : 2 to 3 microns @ 9 to 10 inches between the nozzle and the mould.

Packing                      : 600 ml aerosol can.  Packed in carton containing 25 cans.

Toxicity                      : Contents are non toxic.

Performance              : Non sticky, low surface tension (high film forming capacity), and excellent flow friction coupled with lubricating qualities of the formulation helps the shop floor men to increase productivity. This formulation is used if the finished object is to be painted, printed, plated, or hot stamped.

For moulding ABS, SAN, Nylon, HIPS, Epoxy, Polycarbonate, Teflon, PPS, Alkyds, etc.

Material safety data : Contents under pressure.Do not expose to higher temperature or flame.Shall be disposed carefully when the content is emptied.Do not drop the can.


Mail/Fax your enquiries